Dig a hole at a suitable location in your garden that is large enough to accommodate the water feature. Then line the hole with pond liner. The liner should run over the edge slightly to prevent it from slipping off.
Then place the pump at the deepest point of your excavation. Connect the hoses to the pump and let the ends run over the edge. Fill with water.
Place the cover over the excavation. The cover should be large enough that it clearly covers the edge of the excavation. Then position both »Water Jet Lightning« nozzle units, connect them to the ends of the hoses, and align them as desired. Now the surface of the cover can de decorated. For this we recommend smaller, washed pebbles. Ensure that the pebbles do not fall through the holes in the cover.
Connect the pump to the power supply via the external control unit. Use the remote control unit to select the different programs.