OASE Living Water

Water Starlet

installed in a wooden terrace

The following materials are required:

  • 1 x OASE »Water Starlet«
    incl. cable and transformer
  • 1 x pond liner
  • 3 x tear-resistant cord

This is how easy it is:

Step 1

Select a suitable location on your terrace and dig a hole that is large enough to optimally accommodate the spray of the »Water Starlet«.

Step 2

Place the liner in this hole and fasten the liner on the underside of the terrace floor. Fill the hole with water. Before installing the water effect align the nozzles as desired. Fasten the three tear-resistant cords to the unit and place it in the water.

Step 3

Position the water effect using the cords. When the water effect is located at the right point in the water fix the ends of the cords – e.g. on the wooden lathes or underneath the wood terrace with larger stones. When the »Water Starlet« is fastened it is ready to be connected to the power supply.

Step 4

Decorate around the water surface and enjoy your water effect. In the evening twilight the luminous LED rings of the »Water Starlet« are particularly effective.