Water Trio & Quintet
concealed in pebbles
The following materials are required:
- 1 x OASE »Water Trio/Quintet«
incl. external control unit, cable and transformer
- 1 x pond liner
- 1 x cover e.g. grate/wood panel
- Elevation e.g. bricks
- Pebbles or gravel
This is how easy it is:
At an appropriate spot dig a hole with a minimum size of 1 m diameter and a depth of 40 cm.
Line this hole with the pond liner and lay out the liner so that it runs slightly over the edge. The liner diameter should be at least 3 m.
Place the »Water Trio/Quintet« at the desired position. Depending on the depth of the excavation here the use of an elevation, such as bricks, may be required. When the »Water Trio/Quintet« is inserted you can align the nozzles appropriately for the desired fountain.
Continue with the cover. To prevent slipping, the cover should be large enough to fit over the edge of the excavation. Place the cover over the excavation and the water effect. Please ensure that holes for the fountain nozzles are present at the right locations.
Fill with water and decorate the surface all around the fountain. For this we recommend smaller, washed pebbles. The pebbles should be greater in circumference than the holes in the cover, otherwise pebbles would fall through the holes.
Connect the »Water Trio/Quintet« to the power connection via the control unit. Switch on the »Water Trio/Quintet« with the remote control unit and select one of the stored programs that vary in fountain height and speed.