Item number: 51120
This is a three-in-one armature: It is an inlet armature, overflow armature, and at the same time it controls the water level - if equipped with an additional water level sensor.
The combination armature is preferably installed in the side pool wall below the pool edge cover. Installation is simple, the overflow duct fits into the muff of the channel pipe. The fresh water feed pipe and the connection of the cable protection pipe for the water level sensor are connected to the appropriate threaded nipple via PE pipe unions. The overflow funnel can be pushed up or pushed down 20 mm to adjust to the water level.
|Connection||1 x DN 110 / 2 x 1"|
|Material||Stainless steel 1.4301 (AISI 304) / Stainless steel 1.4571 (AISI 316Ti)|
|Dimensions (L x W x H)||mm||340 x 271 x 153|