Water Trio & Quintet

installed in water

The following materials are required:

  • 1 x OASE »Water Trio/Quintet«
    incl. external control unit, cable and transformer
  • Elevation in the water
    e.g. bricks

This is how easy it is:

Step 1

Prior to installing the »Water Trio/Quintet« an elevation may be necessary depending on the water depth. This can be provided by bricks for example. Please ensure that the surface is as level as possible. Now take the individual pumps and place them on the elevation.

Step 2

Select the installation depth in such a manner that the water surface is below the nozzles of the »Water Trio/ Quintet«. Then align the nozzles as desired. They can be easily adjusted in a 15° angle.

Step 3

Connect the cable to the external control unit that is anchored in the ground with a stake (at least 2 m away from the water). As soon as the control unit is supplied with power via the transformer the »Water Trio/Quintet« will start automatically. Place the supplied cover over the control unit to protect it from rain.

Step 4

Use the remote control to select the different programs that vary in fountain height and speed.