Stonecor-preformed pools
Stonecor® pre-formed pond take you along on a trip to the most beautiful lakes in the world:
in Southern Germany to wonderful Chiemsee, to Russia to the banks of the Aral Sea, and even to South America to Lake Titicaca.
All you have to do is install such a pre-formed pool in your garden. And a piece of the big wide world will be close to you at home. Fun and a lot of satisfaction are guaranteed.
Natural stone is worked into Stonecor® pre-formed pools in a patented process. You can choose either a decorative basalt or sandstone surface that harmonise wonderfully and naturally with your garden.
Ideal conditions are offered for water quality, plants, and fish. Deep and shallow areas as well as a bog zone are already laid out. The only thing left for you to do is install the pond - it is really quite easy and does not take long.
Install it yourself – easily!
Step 1
SELECT LOCATION: Balanced ratio of sunlight hours and shade hours, and not in the direct vicinity of trees.
Step 2
TOOLS REQUIRED: Tape measure, spade, shovel, wheelbarrow, spirit level, garden hose, and building sand. Let's go!
Step 3
LOCATING THE POND: Place it in the intended location and align in the desired position.
Step 4
MARK THE CONTOUR: Sand works well for this. So that the contours of the pond shells are marked.
Step 5
COMPLETE CONTOUR: This is how the markings should look, complete with all deep zones.
Step 6
EXCAVATE THE HOLE: Start from the outside and move to the inside, and verify the depth several times to be sure.
Step 7
FIRST PLACEMENT TRIAL: Insert the pond to see how it fits and adjust the hole as needed.
Step 8
SMOOTH OUT THE AREAS: The floor should be horizontally and vertically level and free of rocks.
Step 9
INTRODUCE THE FILL LAYERS: Apply a bed of sand to the horizontal surfaces.
Step 10
INSERT POND: Use a spirit level to level in all directions.
Step 11
LET THE WATER RUN: First fill only a third of the total pond volume. Then level the pond again.
Step 12
FILL IN THE SIDES: If the pond is solidly in place and horizontal, then fill the sides with sand.
Step 13
SHAPE THE TRANSITION: Gravel is a visually appealing and harmonious design element for the transition area.
Step 14
THE JOY INCREASES: Add plants, install the fountain pump
and fill the pond completely with water.
Step 15
ENCHANTINGLY BEAUTIFUL: The Stonecor® pre-formed pool water garden is ready!