Item number: 57472
In musical fountains or other fountain installations with dynamic elements water becomes lively with help from Vario switch systems.
The air for alternately switching (e.g. atmospheric pressure on and off) is supplied via the telescopic tube. Switchover time is flow dependent and cycles of 0.1 s are achievable. Please note: the operational range of the device is limited by the min. and max. flow rate als shown below.
This water switch is combined with a suitable nozzle and switches between two outputs - similar to a 3/2- way valve - almost without pressure loss and without water hammer effects in the lines. Normally one of those outputs is used as a pure bypass, however a second nozzle can also be mounted.
|Flow rate Q min.||l/min||35|
|Flow rate Q max.||l/min||95|
|Min. operating pressure||bar||0.1|
|Max operating pressure||bar||3.4|
|Partice size max.||mm||2|
|Rated voltage||24 V / DC|
|Power consumption||W||2 x 8|
|Power cable length||m||2.00|
|Protection class||IP 58|
|Dimensions (L x W x H)||mm||150 x 120 x 210|
|Material||Plastic / stainless steel|
|Bill of quantity:|